Commissioning issues Hyperion @Pi3a

Hi all,

I had bought this LED's on Amazon and I have some issues to bring them to life on a Pi 3A+

The setup is new, it's my first Hyperion Project.

The setup based on this youtube video.

It seems that hyperion doesn't see the stripe, see protocol below.

Any idea how to solf this issue?

Thanks in advance

Timo

2024-03-29T08:51:17.413Z [LEDDEVICE|First LED Hardware instance] (ERROR) Device disabled, device 'ws281x' signals error: 'Failed to open. Error message: Hardware revision is not supported'
2024-03-29T14:46:33.800Z [LEDDEVICE|First LED Hardware instance] (ERROR) Previous line repeats 6 times
2024-03-29T14:46:33.801Z [LEDDEVICE|First LED Hardware instance] (ERROR) Device disabled. Maximum number of 6 attempts enabling the device reached. Tried for 105 seconds.

thank you both for your help.

I use the version 2.0.16

Where to use a command line in hyperion? Sorry for my stupid questions but I use these tool since 2 days

if I run top | grep hyperion on the Hyperbian OS the system freezes. The cat /... command ends in an error message

here we go with the cat result, sorry

pi@pi:~ $ cat /proc/cpuinfo

processor : 0

BogoMIPS : 38.40

Features : fp asimd evtstrm crc32 cpuid

CPU implementer : 0x41

CPU architecture: 8

CPU variant : 0x0

CPU part : 0xd03

CPU revision : 4

processor : 1

BogoMIPS : 38.40

Features : fp asimd evtstrm crc32 cpuid

CPU implementer : 0x41

CPU architecture: 8

CPU variant : 0x0

CPU part : 0xd03

CPU revision : 4

processor : 2

BogoMIPS : 38.40

Features : fp asimd evtstrm crc32 cpuid

CPU implementer : 0x41

CPU architecture: 8

CPU variant : 0x0

CPU part : 0xd03

CPU revision : 4

processor : 3

BogoMIPS : 38.40

Features : fp asimd evtstrm crc32 cpuid

CPU implementer : 0x41

CPU architecture: 8

CPU variant : 0x0

CPU part : 0xd03

CPU revision : 4

Revision : 9020e1

Serial : 0000000088a42fd7

Model : Raspberry Pi 3 Model A Plus Rev 1.1

pi@pi:~ $

and here we go with the top command result, sorry again

pi@pi:~ $ sudo top | grep hyperion

[1]+ Stopped sudo top | grep --color=auto hyperion

First of all, thank you so much for support!

okay, I have got installed Hyperion on my old Pi Zero W aaaand it is working absolutely perfekt.

Any idea if the pi 3, wich I use before, will be supported in Hyperbian some times?