Hey guys.
So I've bought a Pi Zero W recently along with ws2812 stripes. I have never done anything quite like this before, which is why I did not buy external grabber components and wanted to try and get ambilight to work with the internal grabber first.
The stripes work and I was able to get them to light up using the example strandtest.py file from https://github.com/jgarff/rpi_ws281x.
Unfortunately, the same cannot be said about Hyperion. I start the hyperion.service and check the status right after with "sudo systemctl status hyperion.service" and get the following
hyperion.service: main process exited, code=killed, status=6/ABRT
ssh: Apr 30 16:09:48 raspberrypi systemd[1]: Unit hyperion.service entered failed state.
Whenever I enter the command "hyperiond /etc/hyperion/hyperion.config.json" I get the output
LEDDEVICE INFO: configuration:
Apr 30 15:59:06 raspberrypi hyperiond[1099]: {
Apr 30 15:59:06 raspberrypi hyperiond[1099]: "colorOrder" : "grb",
Apr 30 15:59:06 raspberrypi hyperiond[1099]: "leds" : 100,
Apr 30 15:59:06 raspberrypi hyperiond[1099]: "name" : "MyHyperionConfig",
Apr 30 15:59:06 raspberrypi hyperiond[1099]: "type" : "ws281x"
Apr 30 15:59:06 raspberrypi hyperiond[1099]: }
Apr 30 15:59:06 raspberrypi hyperiond[1099]: whiteAlgorithm ::
Apr 30 15:59:06 raspberrypi hyperiond[1099]: Unable to initialize ws281x library.
Apr 30 15:59:06 raspberrypi hyperiond[1099]: terminate called after throwing an instance of 'int'
I installed Hyperion through HyperionCon and also manually via the terminal, both resulting in said error.
I did read https://hyperion-project.org/wiki/3-Wire-PWM and have the same layout and configuration. Somehow though the ws281x library does not seem to correctly initialise.
Any ideas on how this could be solved?
Thanks in advance!
I am running Raspbian Jessie with PIXEL
output of "cat /proc/cpuinfo"
processor : 0
model name : ARMv6-compatible processor rev 7 (v6l)
BogoMIPS : 997.08
Features : half thumb fastmult vfp edsp java tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xb76
CPU revision : 7
Hardware : BCM2835
Revision : 9000c1
Serial : 00000000xxxxxxxx
Alles anzeigen