Hallo Sigi,ist das jetzt oky?
console=serial0,115200 console=tty1 root=PARTUUID=e2708eb6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles spidev.bufsiz=1024000
Hallo Sigi,ist das jetzt oky?
console=serial0,115200 console=tty1 root=PARTUUID=e2708eb6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles spidev.bufsiz=1024000
ja genau
Hallo Cosmicbase, wie du mir das schon geschrieben hattest.
dtparam=i2c_arm=on
dtparam=i2s=on
dtparam=spi=on
warte mal ich habe noch was
Darf das so bleiben ?
# uncomment to force a specific HDMI mode (this will force VGA)
hdmi_group=2
hdmi_mode=82
Das stand in Cosmicbase config
Ich komme auf das Dashbord und sehe auch das Live Video
Sigi kannst du dir mal meine config anschauen ?
was steht denn in der log Ausgabe?
Bin noch mit der SD Karte am lapi
Ich mach die karte mal wieder in den raspi
Hier Sigi
2021-02-27T13:33:06.462Z [hyperiond DAEMON] (INFO) CEC handler created
2021-02-27T13:33:06.487Z [hyperiond EFFECTFILES] (INFO) 39 effects loaded from directory :/effects/
2021-02-27T13:33:06.491Z [hyperiond EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/
2021-02-27T13:33:06.493Z [hyperiond EFFECTFILES] (INFO) 0 effects loaded from directory /home/pi/.hyperion/custom-effects
2021-02-27T13:33:06.533Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:109:SettingsManager()) Settings database initialized
2021-02-27T13:33:06.536Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default
2021-02-27T13:33:06.536Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
2021-02-27T13:33:06.573Z [hyperiond DAEMON] (INFO) set screen capture device to 'dispmanx'
2021-02-27T13:33:06.574Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2021-02-27T13:33:06.576Z [hyperiond DISPMANXGRABBER] (INFO) Display opened with resolution: 1920x1080
2021-02-27T13:33:06.576Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 87, height: 49 for capture
2021-02-27T13:33:06.576Z [hyperiond DAEMON] (INFO) DISPMANX frame grabber created
2021-02-27T13:33:06.577Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2021-02-27T13:33:06.673Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 640, height: 480 for capture
2021-02-27T13:33:06.673Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal threshold set to: {12, 12, 12}
2021-02-27T13:33:06.674Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) CEC detection is now disabled
2021-02-27T13:33:06.674Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection is now disabled
2021-02-27T13:33:06.674Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2021-02-27T13:33:06.674Z [hyperiond DAEMON] (DEBUG) (hyperiond.cpp:630:handleSettingsUpdate()) V4L2 grabber created
2021-02-27T13:33:06.674Z [hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:28:JsonServer()) Created instance
2021-02-27T13:33:06.675Z [hyperiond JSONSERVER] (INFO) Started on port 19444
2021-02-27T13:33:06.578Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'sk6812spi'.
2021-02-27T13:33:06.578Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":272,"hardwareLedCount":1,"invert":false,"latchTime":0,"output":"/dev/spidev0.0","rate":3e+06,"rewriteTime":1000,"type":"sk6812spi","whiteAlgorithm":"sub_min_warm_adjust"}]
2021-02-27T13:33:06.578Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
2021-02-27T13:33:06.579Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
2021-02-27T13:33:06.579Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]: Type: linear - Time: 200 ms, outputRate 50.000000 Hz, interpolationRate: 1.000000 Hz, timer: 20 ms, Dithering: 1, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-02-27T13:33:06.579Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:428:setRewriteTime()) Refresh interval = 1000ms
2021-02-27T13:33:06.580Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 1000ms
2021-02-27T13:33:06.580Z [hyperiond LEDDEVICE] (DEBUG) (ProviderSpi.cpp:45:init()) _baudRate_Hz [3000000], _latchTime_ms [0]
2021-02-27T13:33:06.580Z [hyperiond LEDDEVICE] (DEBUG) (ProviderSpi.cpp:46:init()) _spiDataInvert [0], _spiMode [0]
2021-02-27T13:33:06.580Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceSk6812SPI.cpp:41:init()) whiteAlgorithm : sub_min_warm_adjust
2021-02-27T13:33:06.587Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) Previous line repeats 1 times
2021-02-27T13:33:06.587Z [hyperiond FLATBUFCONN] (INFO) Connecting to Hyperion: 127.0.0.1:19401
2021-02-27T13:33:06.599Z [hyperiond EFFECTENGINE] (INFO) Run effect "Rainbow swirl fast" on channel 0
2021-02-27T13:33:06.654Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2]
2021-02-27T13:33:06.654Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
2021-02-27T13:33:06.655Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Rainbow swirl fast' started
2021-02-27T13:33:06.656Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive
2021-02-27T13:33:06.656Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled
2021-02-27T13:33:06.697Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) configured v4l device: /dev/video0
2021-02-27T13:33:06.697Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:582:init_device()) Set device input to: Camera 1
2021-02-27T13:33:06.702Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=640 height=480
2021-02-27T13:33:06.704Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:713:init_device()) Set framerate to 30 fps
2021-02-27T13:33:06.704Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV
2021-02-27T13:33:06.712Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Started
2021-02-27T13:33:06.712Z [hyperiond V4L2:/dev/video0] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2021-02-27T13:33:06.657Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/GRABBER' with priority 250 as inactive
2021-02-27T13:33:06.657Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Framegrabber: enabled
2021-02-27T13:33:06.712Z [hyperiond Dispmanx] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2021-02-27T13:33:06.658Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
2021-02-27T13:33:06.713Z [hyperiond HYPERION] (INFO) Hyperion instance 'First LED Hardware instance' has been started
2021-02-27T13:33:06.658Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2021-02-27T13:33:06.683Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400
2021-02-27T13:33:06.684Z [hyperiond PROTOSERVER] (INFO) Started on port 19445
2021-02-27T13:33:06.684Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
2021-02-27T13:33:06.689Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
2021-02-27T13:33:06.782Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
2021-02-27T13:33:06.783Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
2021-02-27T13:33:06.782Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
2021-02-27T13:33:06.783Z [hyperiond WEBSERVER] (INFO) Started on port 8090 name 'Hyperion Webserver'
2021-02-27T13:33:06.783Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
2021-02-27T13:33:06.803Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active
2021-02-27T13:33:06.803Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2021-02-27T13:33:06.803Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-02-27T13:33:06.803Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255]
2021-02-27T13:33:06.803Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on
2021-02-27T13:33:06.819Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 250 is now active
2021-02-27T13:33:06.820Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:175:handleSettingsUpdate()) Setup SSL certificate
2021-02-27T13:33:06.821Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:191:handleSettingsUpdate()) Setup private SSL key
2021-02-27T13:33:06.822Z [hyperiond WEBSERVER] (INFO) Started on port 8092 name 'Hyperion Webserver'
2021-02-27T13:33:06.837Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 0 is now active
2021-02-27T13:33:09.903Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:315:setCurrentTime()) Timeout clear for priority 0
2021-02-27T13:33:09.904Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2021-02-27T13:33:09.905Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]: Type: linear - Time: 200 ms, outputRate 50.000000 Hz, interpolationRate: 1.000000 Hz, timer: 20 ms, Dithering: 1, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-02-27T13:33:09.905Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[0]
2021-02-27T13:33:10.153Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240
2021-02-27T13:33:10.177Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[0]
2021-02-27T13:33:19.824Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.178.53
2021-02-27T13:33:19.824Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.178.53' switch to Hyperion instance 0
2021-02-27T13:33:20.073Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.53
2021-02-27T13:33:20.105Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1063:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.178.53
2021-02-27T13:38:19.715Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:204:sendClose()) send close: 1000
2021-02-27T13:39:39.541Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.178.53
2021-02-27T13:39:39.541Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.178.53' switch to Hyperion instance 0
2021-02-27T13:39:39.884Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.53
sieht doch gut aus.
Aber GPIO 18? PCM Mode.
GPIO 10 (PIN 19) musst doch nehmen für SPI.
Hallo Sigi ich habe jetzt pin 20 masse und pin 19 data ich wrde es mal probieren .
So hat das Cosmicbase auf sein bild.
Beitrag #85?
ist Pin 19
ich habe
Sigi ich habe jetzt pin 20 masse und pin 19 data ich wrde es mal probieren .
Und die LEDS gehen nicht an . Hyperon alfa 9
ja Beitrag 85.
ich habe auch dev spidev0.0 oder muss das 0.01 sein
Ich habe vieleicht beim umlöten ein zu dünnen draht genommen weil ich vorher die apa 102 hatte und mit ein cat 6 kabel auf die daten gelötet hatte nun habe ich eine Arder dran vielleicht war das der fehler
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!