Can you control wireless LEDs via hyperion?

benmarte · 14. Dezember 2020

I have this and I would like to know if it's possible to connect it to Hyperion wirelessly to my rpi running the latest version of hypebian?

I've tried using wled as my controller type but I get nothing, any help would be greatly appreciated.

Thanks.

Bub4 · 14. Dezember 2020

WLED is for WLED with e.g. NodeMCU

https://github.com/Aircoookie/WLED

Yes: Hyperion can send information via WiFi to compatible ESP8266/ESP32 boards and it works like a charm
-> https://github.com/Aircoookie/WLED/wiki

benmarte · 14. Dezember 2020

Zitat von Bub4

WLED is for WLED with e.g. NodeMCU

https://github.com/Aircoookie/WLED

Yes: Hyperion can send information via WiFi to compatible ESP8266/ESP32 boards and it works like a charm
-> https://github.com/Aircoookie/WLED/wiki

So I assume my problem is this is not a compatible controller correct?

Bub4 · 14. Dezember 2020

I guess so. But I am not as advanced as other users here.
If it can't work with your controller you might want to look at another ESP board. They are not very expensive...
and WLED is just nice. Maybe it can make sense in your other applications

benmarte · 14. Dezember 2020

Doing a quick search I found these 2 projects that apparently have the protocol to communicate with this controller I wonder how complex it would be to add this to Hyperion.

https://github.com/adamkempenich/magichome-python

https://github.com/beville/flux_led

TPmodding · 25. Dezember 2020

1. its easier to buy a wemos d1 and flash with wled
2. you can open the case and see if its also uses the esp8266 chip, if yes, just look which pins are used and then compile wled yourself... easy

benmarte · 25. Dezember 2020

Yeah I tried flashing it with wled but that didn't get me anywhere, ended up buying some wled boards and got it working with udp but I can't get more than 1 instance of wled working. I tried changing ports because I thought there was a port conflict since both wled lights are using the same port so now I don't know if that is the case or if hyperion can't support more than 1 wled instance.

TPmodding · 25. Dezember 2020

why you dont use wled device instead of udp?

benmarte · 25. Dezember 2020

How would I do that I tried using wled as the controller type but it does not work, the only I've got it to work so far was using udpraw and port 19446, if you have another way of making it work I'm all for trying it out.

Thanks.

TPmodding · 25. Dezember 2020

what happens if you use wled as device?

benmarte · 25. Dezember 2020

Nothing wled just works as it's own device like it never receives any data from hyperion

TPmodding · 25. Dezember 2020

ok strange, could you provide some debug-logs?

benmarte · 25. Dezember 2020

Here you go:

Code

2020-12-25T22:20:40.263Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'wled'.
2020-12-25T22:20:40.274Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:56:init())
2020-12-25T22:20:40.283Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":300,"hardwareLedCount":300,"host":"192.168.2.79:21324","latchTime":0,"type":"wled"}]
2020-12-25T22:20:40.289Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
2020-12-25T22:20:40.299Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
2020-12-25T22:20:40.306Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:64:init()) DeviceType   : wled
2020-12-25T22:20:40.312Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:65:init()) LedCount     : 300
2020-12-25T22:20:40.320Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:66:init()) ColorOrder   : rgb
2020-12-25T22:20:40.332Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:67:init()) LatchTime    : 0
2020-12-25T22:20:40.338Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:109:initRestAPI())
2020-12-25T22:20:40.355Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:120:initRestAPI()) [1]
2020-12-25T22:20:40.366Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":300,"hardwareLedCount":300,"host":"192.168.2.79","latchTime":0,"port":19446,"type":"wled"}]
2020-12-25T22:20:40.374Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
2020-12-25T22:20:40.382Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
2020-12-25T22:20:40.395Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:43:init()) Successfully parsed 192.168.2.79 as an IP-address.
2020-12-25T22:20:40.403Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:73:init()) UDP socket will write to 192.168.2.79:19446
2020-12-25T22:20:40.412Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:98:init()) Hostname/IP  : 192.168.2.79
2020-12-25T22:20:40.418Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:99:init()) Port         : 19446
2020-12-25T22:20:40.420Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:103:init()) [1]
2020-12-25T22:20:40.438Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
2020-12-25T22:20:40.446Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.2.79:21324/json/state] [{"on":true}]
2020-12-25T22:20:47.906Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [0]
2020-12-25T22:20:47.918Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'wled' signals error: 'Connection refused'
2020-12-25T22:20:51.328Z [hyperiond EFFECTENGINE] (INFO) Run effect "My Modded Effect" on channel 1
2020-12-25T22:20:51.336Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [My Modded Effect], smoothCfg [0]
2020-12-25T22:20:51.648Z [hyperiond EFFECTENGINE] (INFO) effect finished
2020-12-25T22:20:55.232Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.2.16

Alles anzeigen

benmarte · 25. Dezember 2020

Do you know what I need to do in wled app to get it working? I was going off from the instructions provided here: https://github.com/Aircoookie/WLED/wiki/UDP-Realtime-Control

benmarte · 25. Dezember 2020

Weird I just changed the controller from file to wled again and it started working

benmarte · 26. Dezember 2020

Weird it keeps disabling the wled device it's very erratic using wled as the controller udpraw works fine but I can only get 1 instance running with udpraw.

Here's the log output:

Code

2020-12-26T00:17:37.740Z [hyperiond DAEMON] (INFO) CEC handler created
2020-12-26T00:17:37.821Z [hyperiond EFFECTFILES] (INFO) 39 effects loaded from directory :/effects/
2020-12-26T00:17:37.845Z [hyperiond EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/
2020-12-26T00:17:37.850Z [hyperiond EFFECTFILES] (INFO) 0 effects loaded from directory /.hyperion/custom-effects
2020-12-26T00:17:38.236Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:109:SettingsManager()) Settings database initialized
2020-12-26T00:17:38.261Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default
2020-12-26T00:17:38.263Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
2020-12-26T00:17:39.300Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:109:SettingsManager()) Settings database initialized
2020-12-26T00:17:39.344Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default
2020-12-26T00:17:39.348Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
2020-12-26T00:17:39.497Z [hyperiond DAEMON] (INFO) set screen capture device to 'dispmanx'
2020-12-26T00:17:39.498Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2020-12-26T00:17:39.532Z [hyperiond DISPMANXGRABBER] (INFO) Display opened with resolution: 640x480
2020-12-26T00:17:39.546Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 80, height: 45 for capture
2020-12-26T00:17:39.549Z [hyperiond DAEMON] (INFO) DISPMANX frame grabber created
2020-12-26T00:17:39.574Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2020-12-26T00:17:40.046Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 640, height: 480 for capture
2020-12-26T00:17:40.058Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal threshold set to: {12, 12, 12}
2020-12-26T00:17:40.063Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection is now disabled
2020-12-26T00:17:40.065Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2020-12-26T00:17:40.070Z [hyperiond DAEMON] (DEBUG) (hyperiond.cpp:630:handleSettingsUpdate()) V4L2 grabber created
2020-12-26T00:17:40.080Z [hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:28:JsonServer()) Created instance
2020-12-26T00:17:40.084Z [hyperiond JSONSERVER] (INFO) Started on port 19444
2020-12-26T00:17:38.379Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
2020-12-26T00:17:38.394Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2020-12-26T00:17:38.402Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'wled'.
2020-12-26T00:17:38.405Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:56:init())
2020-12-26T00:17:38.408Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":300,"hardwareLedCount":300,"host":"192.168.2.120","latchTime":0,"type":"wled"}]
2020-12-26T00:17:38.411Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
2020-12-26T00:17:38.413Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
2020-12-26T00:17:38.417Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:64:init()) DeviceType   : wled
2020-12-26T00:17:38.419Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:65:init()) LedCount     : 300
2020-12-26T00:17:38.423Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:66:init()) ColorOrder   : rgb
2020-12-26T00:17:38.424Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:67:init()) LatchTime    : 0
2020-12-26T00:17:38.424Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:109:initRestAPI())
2020-12-26T00:17:38.422Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) Previous line repeats 1 times
2020-12-26T00:17:38.431Z [hyperiond FLATBUFCONN] (INFO) Connecting to Hyperion: 127.0.0.1:19401
2020-12-26T00:17:38.460Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:120:initRestAPI()) [1]
2020-12-26T00:17:38.464Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":300,"hardwareLedCount":300,"host":"192.168.2.120","latchTime":0,"port":19446,"type":"wled"}]
2020-12-26T00:17:38.451Z [hyperiond EFFECTENGINE] (INFO) Run effect "Rainbow swirl fast" on channel 0
2020-12-26T00:17:38.467Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
2020-12-26T00:17:38.470Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
2020-12-26T00:17:38.472Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:43:init()) Successfully parsed 192.168.2.120 as an IP-address.
2020-12-26T00:17:38.475Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:73:init()) UDP socket will write to 192.168.2.120:19446
2020-12-26T00:17:38.478Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:98:init()) Hostname/IP  : 192.168.2.120
2020-12-26T00:17:38.486Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:99:init()) Port         : 19446
2020-12-26T00:17:38.489Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:103:init()) [1]
2020-12-26T00:17:38.493Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
2020-12-26T00:17:38.496Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.2.120/json/state] [{"on":true}]
2020-12-26T00:17:38.590Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2]
2020-12-26T00:17:38.593Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
2020-12-26T00:17:38.596Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Rainbow swirl fast' started
2020-12-26T00:17:38.624Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive
2020-12-26T00:17:38.627Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled
2020-12-26T00:17:38.631Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
2020-12-26T00:17:40.251Z [hyperiond HYPERION] (INFO) Hyperion instance 'Odyssey G9' has been started
2020-12-26T00:17:38.895Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2020-12-26T00:17:38.900Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255]
2020-12-26T00:17:38.900Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on
2020-12-26T00:17:39.438Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'wled'.
2020-12-26T00:17:39.444Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:56:init())
2020-12-26T00:17:39.431Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
2020-12-26T00:17:39.447Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":300,"hardwareLedCount":300,"host":"192.168.2.79","latchTime":0,"type":"wled"}]
2020-12-26T00:17:39.454Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
2020-12-26T00:17:39.458Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
2020-12-26T00:17:39.465Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:64:init()) DeviceType   : wled
2020-12-26T00:17:39.471Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:65:init()) LedCount     : 300
2020-12-26T00:17:39.474Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:66:init()) ColorOrder   : rgb
2020-12-26T00:17:39.477Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:67:init()) LatchTime    : 0
2020-12-26T00:17:39.478Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:109:initRestAPI())
2020-12-26T00:17:39.479Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:120:initRestAPI()) [1]
2020-12-26T00:17:39.479Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":300,"hardwareLedCount":300,"host":"192.168.2.79","latchTime":0,"port":19446,"type":"wled"}]
2020-12-26T00:17:39.480Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
2020-12-26T00:17:39.481Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
2020-12-26T00:17:39.481Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:43:init()) Successfully parsed 192.168.2.79 as an IP-address.
2020-12-26T00:17:39.482Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:73:init()) UDP socket will write to 192.168.2.79:19446
2020-12-26T00:17:39.482Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:98:init()) Hostname/IP  : 192.168.2.79
2020-12-26T00:17:39.453Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2020-12-26T00:17:39.509Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) Previous line repeats 1 times
2020-12-26T00:17:39.512Z [hyperiond EFFECTENGINE] (INFO) Run effect "Rainbow swirl fast" on channel 0
2020-12-26T00:17:39.518Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2]
2020-12-26T00:17:39.522Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
2020-12-26T00:17:39.528Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Rainbow swirl fast' started
2020-12-26T00:17:39.483Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:99:init()) Port         : 19446
2020-12-26T00:17:39.552Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:103:init()) [1]
2020-12-26T00:17:39.537Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive
2020-12-26T00:17:39.566Z [hyperiond CEC] (INFO) Starting CEC handler
2020-12-26T00:17:39.556Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
2020-12-26T00:17:39.571Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.2.79/json/state] [{"on":true}]
2020-12-26T00:17:39.561Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled
2020-12-26T00:17:40.276Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) configured v4l device: /dev/video0
2020-12-26T00:17:40.278Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:582:init_device()) Set device input to: Camera 1
2020-12-26T00:17:40.284Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=640 height=480
2020-12-26T00:17:40.288Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:713:init_device()) Set framerate to 20 fps
2020-12-26T00:17:40.291Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV
2020-12-26T00:17:40.306Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Started
2020-12-26T00:17:40.315Z [hyperiond V4L2:/dev/video0] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2020-12-26T00:17:39.579Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
2020-12-26T00:17:40.319Z [hyperiond HYPERION] (INFO) Hyperion instance 'WLED-1' has been started
2020-12-26T00:17:39.862Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2020-12-26T00:17:39.866Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255]
2020-12-26T00:17:39.872Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on
2020-12-26T00:17:40.168Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400
2020-12-26T00:17:40.174Z [hyperiond PROTOSERVER] (INFO) Started on port 19445
2020-12-26T00:17:40.197Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
2020-12-26T00:17:40.209Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
2020-12-26T00:17:40.575Z [hyperiond FLATBUFSERVER] (DEBUG) (FlatBufferServer.cpp:74:newConnection()) New connection from ::ffff:192.168.2.16
2020-12-26T00:17:42.091Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
2020-12-26T00:17:42.099Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.2.79/json/state] [{"on":true}]
2020-12-26T00:17:42.110Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
2020-12-26T00:17:42.116Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
2020-12-26T00:17:42.110Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
2020-12-26T00:17:42.126Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
2020-12-26T00:17:42.131Z [hyperiond WEBSERVER] (INFO) Started on port 8090 name 'Hyperion Webserver'
2020-12-26T00:17:42.106Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
2020-12-26T00:17:42.140Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.2.120/json/state] [{"on":true}]
2020-12-26T00:17:42.151Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active
2020-12-26T00:17:42.156Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active
2020-12-26T00:17:42.164Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 0 is now active
2020-12-26T00:17:42.144Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:175:handleSettingsUpdate()) Setup SSL certificate
2020-12-26T00:17:42.205Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 0 is now active
2020-12-26T00:17:42.219Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:191:handleSettingsUpdate()) Setup private SSL key
2020-12-26T00:17:42.258Z [hyperiond WEBSERVER] (INFO) Started on port 8092 name 'Hyperion Webserver'
2020-12-26T00:17:43.170Z [hyperiond CEC] (INFO) Auto detecting CEC adapter
2020-12-26T00:17:43.194Z [hyperiond CEC] (INFO) CEC Adapter:
2020-12-26T00:17:43.225Z [hyperiond CEC] (INFO)     Name   : RPI
2020-12-26T00:17:43.232Z [hyperiond CEC] (INFO)     Path   : Raspberry Pi
2020-12-26T00:17:44.702Z [hyperiond CEC] (INFO) CEC Handler initialized with adapter : RPI
2020-12-26T00:17:45.594Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.2.16
2020-12-26T00:17:45.620Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.2.16' switch to Hyperion instance 0
2020-12-26T00:17:48.519Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [0]
2020-12-26T00:17:48.529Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [0]
2020-12-26T00:17:48.548Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'wled' signals error: 'Host unreachable'
2020-12-26T00:17:48.540Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'wled' signals error: 'Host unreachable'
2020-12-26T00:17:48.557Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [0]
2020-12-26T00:17:48.568Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'wled' signals error: 'Host unreachable'
2020-12-26T00:17:48.554Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [0]
2020-12-26T00:17:48.576Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'wled' signals error: 'Host unreachable'
2020-12-26T00:19:05.223Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.2.16
2020-12-26T00:19:05.372Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1063:handleLoggingCommand()) log streaming deactivated for client  ::ffff:192.168.2.16
2020-12-26T00:19:11.278Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.2.16' switch to Hyperion instance 0
2020-12-26T00:19:20.110Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:270:clearInput()) Removed source priority 0
2020-12-26T00:19:20.125Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240
2020-12-26T00:19:20.301Z [hyperiond EFFECTENGINE] (INFO) effect finished
2020-12-26T00:19:24.355Z [hyperiond FLATBUFSERVER] (DEBUG) (FlatBufferClient.cpp:70:disconnected()) Socket Closed
2020-12-26T00:19:25.897Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:315:setCurrentTime()) Timeout clear for priority 0
2020-12-26T00:19:25.903Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2020-12-26T00:19:25.904Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[0]
2020-12-26T00:19:26.148Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240
2020-12-26T00:19:26.158Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[0]
2020-12-26T00:19:27.385Z [hyperiond FLATBUFSERVER] (DEBUG) (FlatBufferServer.cpp:74:newConnection()) New connection from ::ffff:192.168.2.16
2020-12-26T00:19:27.419Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'HyperionScreenCap@::ffff:192.168.2.16/FLATBUFSERVER' with priority 100 as inactive
2020-12-26T00:19:27.425Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'HyperionScreenCap@::ffff:192.168.2.16/FLATBUFSERVER' with priority 100 as inactive
2020-12-26T00:19:27.431Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 100 is now active
2020-12-26T00:19:27.434Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 100
2020-12-26T00:19:27.447Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 100 is now active
2020-12-26T00:19:27.450Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 100
2020-12-26T00:19:27.455Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[100], previousPriority[240]
2020-12-26T00:19:31.070Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
2020-12-26T00:19:31.076Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.2.120/json/state] [{"on":true}]
2020-12-26T00:19:31.095Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2020-12-26T00:19:37.329Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [0]
2020-12-26T00:19:37.335Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'wled' signals error: 'Host unreachable'
2020-12-26T00:19:37.336Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: disabled
2020-12-26T00:20:01.089Z [hyperiond LEDDEVICE] (INFO)  Stopped LedDevice 'wled'
2020-12-26T00:20:01.125Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'ws281x'.
2020-12-26T00:20:01.133Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"brg","currentLedCount":300,"dma":5,"gpio":18,"hardwareLedCount":92,"invert":false,"latchTime":0,"leds":256,"pwmchannel":0,"rewriteTime":1000,"rgbw":false,"type":"ws281x","whiteAlgorithm":"subtract_minimum"}]
2020-12-26T00:20:01.166Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
2020-12-26T00:20:01.176Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:428:setRewriteTime()) Refresh interval = 1000ms
2020-12-26T00:20:01.190Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 1000ms
2020-12-26T00:20:01.196Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWS281x.cpp:59:init()) ws281x strip type : 1050624
2020-12-26T00:20:01.217Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2020-12-26T00:20:57.920Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'Web Configuration@::ffff:192.168.2.16/COLOR' with priority 1 as inactive
2020-12-26T00:20:57.926Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:207:setInput()) Priority 1 is now active
2020-12-26T00:20:57.928Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 1
2020-12-26T00:21:06.251Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:270:clearInput()) Removed source priority 1
2020-12-26T00:21:06.257Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 100
2020-12-26T00:21:07.489Z [hyperiond LEDDEVICE] (INFO)  Stopped LedDevice 'ws281x'
2020-12-26T00:21:07.511Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: disabled
2020-12-26T00:21:07.523Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'ws281x'.
2020-12-26T00:21:07.527Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"grb","currentLedCount":92,"dma":5,"gpio":18,"hardwareLedCount":92,"invert":false,"latchTime":0,"leds":256,"pwmchannel":0,"rewriteTime":1000,"rgbw":false,"type":"ws281x","whiteAlgorithm":"subtract_minimum"}]
2020-12-26T00:21:07.531Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
2020-12-26T00:21:07.535Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:428:setRewriteTime()) Refresh interval = 1000ms
2020-12-26T00:21:07.554Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 1000ms
2020-12-26T00:21:07.560Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWS281x.cpp:59:init()) ws281x strip type : 1050624
2020-12-26T00:21:07.586Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2020-12-26T00:21:07.641Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Previous line repeats 1 times
2020-12-26T00:21:07.655Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:204:sendClose()) send close: 1000
2020-12-26T00:21:09.911Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.2.16
2020-12-26T00:21:09.935Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.2.16' switch to Hyperion instance 0
2020-12-26T00:24:43.324Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.2.16' switch to Hyperion instance 1
2020-12-26T00:25:20.179Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
2020-12-26T00:25:20.185Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.2.79/json/state] [{"on":true}]
2020-12-26T00:25:20.204Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2020-12-26T00:25:26.449Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [0]
2020-12-26T00:25:26.458Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'wled' signals error: 'Host unreachable'
2020-12-26T00:25:26.461Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: disabled
2020-12-26T00:25:27.404Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.2.16

Alles anzeigen

benmarte · 26. Dezember 2020

It seems the problem lies in wled app, I changed the led sync port to 21324 which is the default and saved it then saved and reboot and it works with hyperion using wled

Can you control wireless LEDs via hyperion?

Jetzt mitmachen!

Benutzer online in diesem Thema