1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

SOLVED SK9822+Hue Playbars together...

Discussion in 'Software Support' started by jpdawsome, 3 February 2021.

  1. jpdawsome

    jpdawsome New Member

    Messages:
    7
    Hardware:
    RPi3, +PhilipsHue
    Hi all!

    I'm a definite noob with Hyperion but I have my SK9822 strip running on the back of my tv but I am trying to use 2 Hue Playbars on a table below the tv and I can't figure out how to get both going at the same time and synced up. I can get either working on their own but I can't seem to do both at the same time.

    Any suggestions? Maybe I am overlooking something basic? I've looked around the forums but no answers yet.

    Thanks!
     
  2. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    2,132
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +WLED, RPi4
    how many instances do you use?
     
  3. jpdawsome

    jpdawsome New Member

    Messages:
    7
    Hardware:
    RPi3, +PhilipsHue
    Maybe that’s my problem. I don’t know how to tell how many I have. I think only one but that’s because I only have one video grabber. Can I use the same grabber for both instances for the sk9822 and the hue play bars as well?
     
  4. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    2,132
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +WLED, RPi4
  5. Ravenblight

    Ravenblight New Member

    Messages:
    15
    Hardware:
    RPi3
    Probably this is a similar problem to what I have. One instance works well, but when I've tried to enable the second one the first one stops, and zero log info, and grabber disappears till restart.
     
  6. Ravenblight

    Ravenblight New Member

    Messages:
    15
    Hardware:
    RPi3
    I've played with settings, and still cannot figure it out. APA102 instance works fine, until I change something in hue. Hue lights are reacting to remote solid color, but when I re-enable usb grabber in remote, apa102 disables grabber, hue still no reaction. Debug log shows only informations no errors, warnings etc.
     
  7. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    2,132
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +WLED, RPi4
    if you dont have logs in the webui, you can start "hyperiond -debug" in terminal, maybe then we can find any infos
     
  8. Ravenblight

    Ravenblight New Member

    Messages:
    15
    Hardware:
    RPi3
    I found time to sit to this today, and I've removed the second instance, cleared db file from .hyperion/db restarted hyperion.service. Then I've imported the apa102 config into the main instance and recreated it from the scratch hue instance (it was needed to recreate user key in hue entertainment api). Now its working I set up hassio integration again.
    @TPmodding hyperiond -debug returns for me:
    Unknown options: e, b.,
    actually only -version shows me the correct output.
     
  9. Lord-Grey

    Lord-Grey Moderator Staff Member Developer

    Messages:
    459
    Hardware:
    RPi3, 32/64bit
    Just start with „-d“
     
    • Like Like x 1
  10. Ravenblight

    Ravenblight New Member

    Messages:
    15
    Hardware:
    RPi3
    hyperiond MAIN : <ERROR> The Hyperion Daemon is already running, abort start
    That is console output of just -d
     
  11. Lord-Grey

    Lord-Grey Moderator Staff Member Developer

    Messages:
    459
    Hardware:
    RPi3, 32/64bit
    You need stop the currently running hyperiond before...
     
  12. Ravenblight

    Ravenblight New Member

    Messages:
    15
    Hardware:
    RPi3
    Looks like hue entertainment api error, when i enable this option with generated key and user hue lamps stop working, when i switched back to standard connection log shows:

    Code:
    021-02-16T15:52:56.171Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Error Type                    : 2
    2021-02-16T15:52:56.171Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Error Address                 : /lights/2/state
    2021-02-16T15:52:56.171Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Error Address Description     : body contains invalid json
    2021-02-16T15:52:56.171Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'philipshue' signals error: '(2) body contains invalid json, Resource:/lights/2/state'
    2021-02-16T15:52:56.172Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: disabled
    2021-02-16T15:53:56.288Z [hyperiond SETTINGSMGR] (WARNING) Fixing json data!
    2021-02-16T15:53:56.328Z [hyperiond SETTINGSMGR] (WARNING) Config Fix: [root].device.rewriteTime: Removed property: rewriteTime
    2021-02-16T15:53:56.379Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:204:sendClose()) send close: 1000 
     
  13. Lord-Grey

    Lord-Grey Moderator Staff Member Developer

    Messages:
    459
    Hardware:
    RPi3, 32/64bit
    Could you restart hyperion with Debug Log on and share the full log from start?
    Plus, do you use an official Hue-Bridge or an alternative e.g. DIYHue?
     
  14. Ravenblight

    Ravenblight New Member

    Messages:
    15
    Hardware:
    RPi3
    It is oryginal second version with blue lightning big button in middle. I'll try to post full log from hyperion restart.
     
  15. Ravenblight

    Ravenblight New Member

    Messages:
    15
    Hardware:
    RPi3
    Hey @Lord-Grey This is full debug log (also hue log enabled) I've did factory reset of bridge, and apa102 instance works, also did test it with yeelight bulb and those two work.

    Code:
    2021-02-16T16:42:27.100Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) RefreshTime                   : 0
    2021-02-16T16:42:27.100Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) LatchTime                     : 0
    2021-02-16T16:42:27.100Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Hostname/IP                   : 192.168.1.112
    2021-02-16T16:42:27.101Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
    2021-02-16T16:42:27.101Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:121:get()) GET: [http://192.168.1.112/api/yhUpLPSlUagz1qlKRJuxtTh8Nrs6n-xDohELhoBJ/]
    2021-02-16T16:42:27.102Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
    2021-02-16T16:42:27.103Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) Previous line repeats 1 times
    2021-02-16T16:42:27.103Z [hyperiond EFFECTENGINE] (INFO) Run effect "Rainbow swirl fast" on channel 0
    2021-02-16T16:42:27.104Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2]
    2021-02-16T16:42:27.105Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
    2021-02-16T16:42:27.105Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Rainbow swirl fast' started
    2021-02-16T16:42:27.107Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive
    2021-02-16T16:42:27.107Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled
    2021-02-16T16:42:27.109Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
    2021-02-16T16:42:27.200Z [hyperiond HYPERION] (INFO) Hyperion instance 'Hue TV' has been started
    2021-02-16T16:42:27.181Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200]
    2021-02-16T16:42:27.181Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'yeelight'.
    2021-02-16T16:42:27.182Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
    2021-02-16T16:42:27.182Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
    2021-02-16T16:42:27.182Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"brightnessFactor":1,"brightnessMax":100,"brightnessMin":1,"brightnessSwitchOffOnMinimum":true,"colorModel":1,"colorOrder":"rgb","currentLedCount":1,"debugLevel":0,"extraTimeDarkness":0,"hardwareLedCount":1,"latchTime":40,"lights":[{"host":"192.168.1.56","name":"Bottom Left (Corner)","port":55443}],"quotaWait":1000,"restoreOriginalState":false,"transEffect":0,"transTime":40,"type":"yeelight"}]
    2021-02-16T16:42:27.183Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 40ms
    2021-02-16T16:42:27.183Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
    2021-02-16T16:42:27.183Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
    2021-02-16T16:42:27.183Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceYeelight.cpp:1010:init()) DeviceType        : yeelight
    2021-02-16T16:42:27.185Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceYeelight.cpp:1011:init()) LedCount          : 1
    2021-02-16T16:42:27.185Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceYeelight.cpp:1012:init()) ColorOrder        : rgb
    2021-02-16T16:42:27.185Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceYeelight.cpp:1013:init()) RewriteTime  : 0
    2021-02-16T16:42:27.186Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceYeelight.cpp:1014:init()) LatchTime         : 40
    2021-02-16T16:42:27.186Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceYeelight.cpp:1057:init()) colorModel        : RGB
    2021-02-16T16:42:27.186Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceYeelight.cpp:1058:init()) Transitioneffect  : smooth
    2021-02-16T16:42:27.186Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) Previous line repeats 1 times
    2021-02-16T16:42:27.186Z [hyperiond EFFECTENGINE] (INFO) Run effect "Rainbow swirl fast" on channel 0
    2021-02-16T16:42:27.186Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceYeelight.cpp:1059:init()) Transitionduration: 40
    2021-02-16T16:42:27.187Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceYeelight.cpp:1060:init()) Extra time darkn. : 0
    2021-02-16T16:42:27.187Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceYeelight.cpp:1062:init()) Brightn. Min      : 1
    2021-02-16T16:42:27.187Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceYeelight.cpp:1063:init()) Brightn. Min Off  : 1
    2021-02-16T16:42:27.187Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceYeelight.cpp:1064:init()) Brightn. Max      : 100
    2021-02-16T16:42:27.186Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2]
    2021-02-16T16:42:27.187Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceYeelight.cpp:1065:init()) Brightn. Factor   : 1.00
    2021-02-16T16:42:27.187Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceYeelight.cpp:1068:init()) RestoreOrigState  : 0
    2021-02-16T16:42:27.189Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceYeelight.cpp:1071:init()) Wait time (quota) : 1000
    2021-02-16T16:42:27.189Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceYeelight.cpp:1073:init()) Debuglevel        : 0
    2021-02-16T16:42:27.189Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceYeelight.cpp:1084:init()) Light [0] - Bottom Left (Corner) (192.168.1.56:55443)
    2021-02-16T16:42:27.189Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceYeelight.cpp:1088:init()) Light configured  : 1
    2021-02-16T16:42:27.187Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
    2021-02-16T16:42:27.190Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceYeelight.cpp:1279:updateLights()) Add Yeelight 192.168.1.56:55443
    2021-02-16T16:42:27.190Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Rainbow swirl fast' started
    2021-02-16T16:42:27.191Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:572:checkApiError()) Reply: [{"config":{"UTC":"2021-02-16T16:42:27","apiversion":"1.42.0","backup":{"errorcode":0,"status":"idle"},"bridgeid":"ECB5FAFFFE1C7915","datastoreversion":"99","dhcp":true,"factorynew":false,"gateway":"192.168.1.1","internetservices":{"internet":"connected","remoteaccess":"disconnected","swupdate":"connected","time":"connected"},"ipaddress":"192.168.1.112","linkbutton":false,"localtime":"2021-02-16T17:42:27","mac":"ec:b5:fa:1c:79:15","modelid":"BSB002","name":"Philips hue","netmask":"255.255.255.0","portalconnection":"connected","portalservices":false,"portalstate":{"communication":"disconnected","incoming":false,"outgoing":true,"signedon":true},"proxyaddress":"none","proxyport":0,"replacesbridgeid":null,"starterkitid":"","swupdate":{"checkforupdate":false,"devicetypes":{"bridge":false,"lights":[],"sensors":[]},"notify":false,"text":"","updatestate":0,"url":""},"swupdate2":{"autoinstall":{"on":false,"updatetime":"T14:00:00"},"bridge":{"lastinstall":null,"state":"noupdates"},"checkforupdate":false,"lastch
    2021-02-16T16:42:27.195Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive
    2021-02-16T16:42:27.195Z [hyperiond PROTOSERVER] (INFO) Started on port 19445
    2021-02-16T16:42:27.195Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled
    2021-02-16T16:42:27.208Z [hyperiond V4L2:AUTO] (INFO) available V4L2 devices:
        /dev/video0    USB Video: USB Video
        /dev/video14    bcm2835-isp-capture0
        /dev/video15    bcm2835-isp-capture1
    
    2021-02-16T16:42:27.208Z [hyperiond V4L2:AUTO] (INFO) search for usable video devices
    2021-02-16T16:42:27.211Z [hyperiond V4L2:AUTO] (INFO) test v4l device: /dev/video0
    2021-02-16T16:42:27.214Z [hyperiond V4L2:AUTO] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=800 height=600
    2021-02-16T16:42:27.216Z [hyperiond V4L2:AUTO] (DEBUG) (V4L2Grabber.cpp:713:init_device()) Set framerate to 20 fps
    2021-02-16T16:42:27.216Z [hyperiond V4L2:AUTO] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV
    2021-02-16T16:42:27.222Z [hyperiond V4L2:AUTO] (INFO) found usable v4l2 device: /dev/video0 (USB Video: USB Video)
    2021-02-16T16:42:27.230Z [hyperiond V4L2:AUTO] (INFO) Started
    2021-02-16T16:42:27.230Z [hyperiond V4L2:auto] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
    2021-02-16T16:42:27.195Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:406:initMaps()) doc: [{"config":{"UTC":"2021-02-16T16:42:27","apiversion":"1.42.0","backup":{"errorcode":0,"status":"idle"},"bridgeid":"ECB5FAFFFE1C7915","datastoreversion":"99","dhcp":true,"factorynew":false,"gateway":"192.168.1.1","internetservices":{"internet":"connected","remoteaccess":"disconnected","swupdate":"connected","time":"connected"},"ipaddress":"192.168.1.112","linkbutton":false,"localtime":"2021-02-16T17:42:27","mac":"ec:b5:fa:1c:79:15","modelid":"BSB002","name":"Philips hue","netmask":"255.255.255.0","portalconnection":"connected","portalservices":false,"portalstate":{"communication":"disconnected","incoming":false,"outgoing":true,"signedon":true},"proxyaddress":"none","proxyport":0,"replacesbridgeid":null,"starterkitid":"","swupdate":{"checkforupdate":false,"devicetypes":{"bridge":false,"lights":[],"sensors":[]},"notify":false,"text":"","updatestate":0,"url":""},"swupdate2":{"autoinstall":{"on":false,"updatetime":"T14:00:00"},"bridge":{"lastinstall":null,"state":"noupdates"},"checkforupdate":false,"lastchan
    2021-02-16T16:42:27.196Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Bridge Name                   : Philips hue
    2021-02-16T16:42:27.196Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
    2021-02-16T16:42:27.196Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Model                         : BSB002
    2021-02-16T16:42:27.232Z [hyperiond HYPERION] (INFO) Hyperion instance 'Yeelight' has been started
    2021-02-16T16:42:27.197Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Bridge-ID                     : ECB5FAFFFE1C7915
    2021-02-16T16:42:27.197Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) SoftwareVersion               : 1942135050
    2021-02-16T16:42:27.197Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) API-Version                   : 1.42.0
    2021-02-16T16:42:27.197Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) EntertainmentReady            : 1
    2021-02-16T16:42:27.198Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:497:setGroupMap()) jsonGroupsInfo: [{"1":{"action":{"alert":"select","bri":1,"colormode":"xy","ct":153,"effect":"none","hue":47104,"on":true,"sat":254,"xy":[0.1532,0.0475]},"class":"Living room","lights":["1","2"],"name":"Living room","recycle":false,"sensors":[],"state":{"all_on":true,"any_on":true},"type":"Room"},"2":{"action":{"alert":"select","bri":1,"colormode":"xy","ct":153,"effect":"none","hue":47104,"on":true,"sat":254,"xy":[0.1532,0.0475]},"class":"TV","lights":["1","2"],"locations":{"1":[1,0.9,0],"2":[-0.9,0.92,0]},"name":"Entertainment area 1","recycle":false,"sensors":[],"state":{"all_on":true,"any_on":true},"stream":{"active":false,"owner":null,"proxymode":"auto","proxynode":"/bridge"},"type":"Entertainment"}}]
    2021-02-16T16:42:27.199Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:470:setLightsMap()) jsonLightsInfo: [{"1":{"capabilities":{"certified":true,"control":{"colorgamut":[[0.6915,0.3083],[0.17,0.7],[0.1532,0.0475]],"colorgamuttype":"C","ct":{"max":500,"min":153},"maxlumen":800,"mindimlevel":200},"streaming":{"proxy":true,"renderer":true}},"config":{"archetype":"sultanbulb","direction":"omnidirectional","function":"mixed","startup":{"configured":true,"mode":"powerfail"}},"manufacturername":"Signify Netherlands B.V.","modelid":"LCA001","name":"Right hue","productid":"Philips-LCA001-5-A19ECLv6","productname":"Hue color lamp","state":{"alert":"select","bri":185,"colormode":"xy","ct":153,"effect":"none","hue":41437,"mode":"homeautomation","on":true,"reachable":true,"sat":77,"xy":[0.3129,0.3291]},"swconfigid":"E2D4D068","swupdate":{"lastinstall":"2021-02-16T16:17:10","state":"noupdates"},"swversion":"1.76.10","type":"Extended color light","uniqueid":"00:17:88:01:06:78:6f:f3-0b"},"2":{"capabilities":{"certified":true,"control":{"colorgamut":[[0.6915,0.3083],[0.17,0.7],[0.1532,0.0475]],"colorgamuttype":"
    2021-02-16T16:42:27.199Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Lights in Bridge found        : 2
    2021-02-16T16:42:27.199Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"blackLightsTimeout":15000,"brightnessFactor":1,"brightnessMax":0.05,"brightnessMin":0,"brightnessThreshold":0,"clientkey":"3046C0B2A84E19AEC0B0F82E336DCF98","colorOrder":"rgb","currentLedCount":2,"debugLevel":"4","debugStreamer":true,"groupId":2,"hardwareLedCount":2,"latchTime":0,"lightIds":["1","2"],"output":"192.168.1.112","restoreOriginalState":false,"sslHSTimeoutMax":1000,"sslHSTimeoutMin":400,"sslReadTimeout":0,"switchOffOnBlack":true,"transitiontime":1,"type":"philipshue","useEntertainmentAPI":true,"username":"yhUpLPSlUagz1qlKRJuxtTh8Nrs6n-xDohELhoBJ","verbose":true}]
    2021-02-16T16:42:27.200Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
    2021-02-16T16:42:27.200Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
    2021-02-16T16:42:27.200Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Streamer Debug            : yes
    2021-02-16T16:42:27.200Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL DebugLevel                : [4] Verbose
    2021-02-16T16:42:27.200Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Servername                :
    2021-02-16T16:42:27.200Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Host                      : 127.0.0.1
    2021-02-16T16:42:27.206Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Port                      : 2100
    2021-02-16T16:42:27.206Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) PSK                           :
    2021-02-16T16:42:27.206Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) PSK-Identity                  :
    2021-02-16T16:42:27.207Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Transport Type            : DTLS
    2021-02-16T16:42:27.207Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Seed Custom               : dtls_client
    2021-02-16T16:42:27.207Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Retry Left                : 5
    2021-02-16T16:42:27.207Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Read Timeout              : 0
    2021-02-16T16:42:27.207Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Handshake Timeout min     : 400
    2021-02-16T16:42:27.207Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Handshake Timeout max     : 1000
    2021-02-16T16:42:27.207Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Handshake attempts        : 5
    2021-02-16T16:42:27.208Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:96:init()) Successfully parsed 127.0.0.1 as an ip address.
    2021-02-16T16:42:27.201Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
    2021-02-16T16:42:27.208Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
    2021-02-16T16:42:27.208Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
    2021-02-16T16:42:27.201Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceYeelight.cpp:1171:startMusicModeServer()) The music mode server is running at 192.168.1.9:35463
    2021-02-16T16:42:27.206Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
    2021-02-16T16:42:27.210Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
    2021-02-16T16:42:27.210Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
    2021-02-16T16:42:27.211Z [hyperiond WEBSERVER] (INFO) Started on port 8090 name 'Hyperion Webserver'
    2021-02-16T16:42:27.201Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400
    2021-02-16T16:42:27.210Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:175:handleSettingsUpdate()) Setup SSL certificate
    2021-02-16T16:42:27.215Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:191:handleSettingsUpdate()) Setup private SSL key
    2021-02-16T16:42:27.208Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:127:init()) UDP SSL using 127.0.0.1:2100
    2021-02-16T16:42:27.216Z [hyperiond WEBSERVER] (INFO) Started on port 8092 name 'Hyperion Webserver'
    2021-02-16T16:42:27.219Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Off on Black                  : 1
    2021-02-16T16:42:27.219Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Brightness Factor             : 1.000000
    2021-02-16T16:42:27.220Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Transition Time               : 1
    2021-02-16T16:42:27.220Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Restore Original State        : 0
    2021-02-16T16:42:27.221Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Use Hue Entertainment API     : 1
    2021-02-16T16:42:27.222Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Entertainment API Group-ID    : 2
    2021-02-16T16:42:27.222Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Signal Timeout on Black       : 15000ms
    2021-02-16T16:42:27.246Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Brightness Min                : 0.000000
    2021-02-16T16:42:27.247Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Brightness Max                : 0.050000
    2021-02-16T16:42:27.247Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Brightness Threshold          : 0.000000
    2021-02-16T16:42:27.247Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Entertainment Group found     : [2] Entertainment area 1
    2021-02-16T16:42:27.247Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Lights in Group               : 2
    2021-02-16T16:42:27.247Z [hyperiond LEDDEVICE] (INFO) Entertainment Group [2] "Entertainment area 1" with 2 Lights found
    2021-02-16T16:42:27.248Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Light-IDs configured          : 2
    2021-02-16T16:42:27.248Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Light-IDs                     : 1, 2
    2021-02-16T16:42:27.248Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:682:PhilipsHueLight()) Recognized model id LCA001 of light ID 1 as gamut C
    2021-02-16T16:42:27.248Z [hyperiond LEDDEVICE] (INFO) Light ID 1 ("Right hue", LED index "0") created
    2021-02-16T16:42:27.248Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:682:PhilipsHueLight()) Recognized model id LCA001 of light ID 2 as gamut C
    2021-02-16T16:42:27.248Z [hyperiond LEDDEVICE] (INFO) Light ID 2 ("Left hue", LED index "1") created
    2021-02-16T16:42:27.249Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"blackLightsTimeout":15000,"brightnessFactor":1,"brightnessMax":0.05,"brightnessMin":0,"brightnessThreshold":0,"clientkey":"3046C0B2A84E19AEC0B0F82E336DCF98","colorOrder":"rgb","currentLedCount":2,"debugLevel":"4","debugStreamer":true,"groupId":2,"hardwareLedCount":2,"host":"192.168.1.112","hs_attempts":5,"hs_timeout_max":1000,"hs_timeout_min":400,"latchTime":0,"lightIds":["1","2"],"output":"192.168.1.112","psk":"3046C0B2A84E19AEC0B0F82E336DCF98","psk_identity":"yhUpLPSlUagz1qlKRJuxtTh8Nrs6n-xDohELhoBJ","read_timeout":0,"restoreOriginalState":false,"retry_left":5,"rewriteTime":20,"seed_custom":"dtls_client","servername":"Hue","sslHSTimeoutMax":1000,"sslHSTimeoutMin":400,"sslReadTimeout":0,"sslport":2100,"switchOffOnBlack":true,"transitiontime":1,"type":"philipshue","useEntertainmentAPI":true,"username":"yhUpLPSlUagz1qlKRJuxtTh8Nrs6n-xDohELhoBJ","verbose":true}]
    2021-02-16T16:42:27.249Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
    2021-02-16T16:42:27.249Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:428:setRewriteTime()) Refresh interval = 20ms
    2021-02-16T16:42:27.249Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 20ms
    2021-02-16T16:42:27.250Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Streamer Debug            : yes
    2021-02-16T16:42:27.250Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL DebugLevel                : [4] Verbose
    2021-02-16T16:42:27.250Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Servername                : Hue
    2021-02-16T16:42:27.250Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Host                      : 192.168.1.112
    2021-02-16T16:42:27.250Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Port                      : 2100
    2021-02-16T16:42:27.250Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) PSK                           : 3046C0B2A84E19AEC0B0F82E336DCF98
    2021-02-16T16:42:27.251Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) PSK-Identity                  : yhUpLPSlUagz1qlKRJuxtTh8Nrs6n-xDohELhoBJ
    2021-02-16T16:42:27.251Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Transport Type            : DTLS
    2021-02-16T16:42:27.251Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Seed Custom               : dtls_client
    2021-02-16T16:42:27.251Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Retry Left                : 5
    2021-02-16T16:42:27.251Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Read Timeout              : 0
    2021-02-16T16:42:27.251Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Handshake Timeout min     : 400
    2021-02-16T16:42:27.251Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Handshake Timeout max     : 1000
    2021-02-16T16:42:27.252Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:202:configLog()) SSL Handshake attempts        : 5
    2021-02-16T16:42:27.252Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:96:init()) Successfully parsed 192.168.1.112 as an ip address.
    2021-02-16T16:42:27.252Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:127:init()) UDP SSL using 192.168.1.112:2100
    2021-02-16T16:42:27.252Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:1277:switchOn())
    2021-02-16T16:42:27.252Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:632:getGroupState()) GetGroupState [2]
    2021-02-16T16:42:27.252Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:121:get()) GET: [http://192.168.1.112/api/yhUpLPSlUagz1qlKRJuxtTh8Nrs6n-xDohELhoBJ/groups/2]
    2021-02-16T16:42:27.266Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200]
    2021-02-16T16:42:27.267Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:572:checkApiError()) Reply: [{"action":{"alert":"select","bri":1,"colormode":"xy","ct":153,"effect":"none","hue":47104,"on":true,"sat":254,"xy":[0.1532,0.0475]},"class":"TV","lights":["1","2"],"locations":{"1":[1,0.9,0],"2":[-0.9,0.92,0]},"name":"Entertainment area 1","recycle":false,"sensors":[],"state":{"all_on":true,"any_on":true},"stream":{"active":false,"owner":null,"proxymode":"auto","proxynode":"/bridge"},"type":"Entertainment"}]
    2021-02-16T16:42:27.268Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:1095:startStream()) Start entertainment stream
    2021-02-16T16:42:27.268Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.1.112/api/yhUpLPSlUagz1qlKRJuxtTh8Nrs6n-xDohELhoBJ/groups/2] [{"stream":{"active":true}}]
    2021-02-16T16:42:27.302Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 255
    2021-02-16T16:42:27.303Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[255], previousPriority[255]
    2021-02-16T16:42:27.303Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:562:handlePriorityChangedLedDevice()) No source left -> switch LED-Device off
    2021-02-16T16:42:27.334Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200]
    2021-02-16T16:42:27.335Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:572:checkApiError()) Reply: [[{"success":{"/groups/2/stream/active":true}}]]
    2021-02-16T16:42:27.335Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:217:sslLog()) init SSL Network...
    2021-02-16T16:42:27.336Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:217:sslLog()) init SSL Network -> initConnection
    2021-02-16T16:42:27.336Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:217:sslLog()) Seeding the random number generator...
    2021-02-16T16:42:27.336Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:217:sslLog()) Set mbedtls_ctr_drbg_seed...
    2021-02-16T16:42:27.336Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:217:sslLog()) Seeding the random number generator...ok
    2021-02-16T16:42:27.337Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:217:sslLog()) Setting up the DTLS structure
    2021-02-16T16:42:27.337Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:217:sslLog()) used ciphersuites value: 168
    2021-02-16T16:42:27.338Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:217:sslLog()) Setting up the DTLS structure...ok
    2021-02-16T16:42:27.338Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:217:sslLog()) init SSL Network -> startUPDConnection
    2021-02-16T16:42:27.339Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:217:sslLog()) Connecting to udp 192.168.1.112:2100
    2021-02-16T16:42:27.339Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:217:sslLog()) Connecting...ok
    2021-02-16T16:42:27.339Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:217:sslLog()) init SSL Network -> startSSLHandshake
    2021-02-16T16:42:27.340Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:217:sslLog()) Performing the SSL/DTLS handshake...
    2021-02-16T16:42:27.340Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:217:sslLog()) handshake attempt 1/5
    2021-02-16T16:42:27.372Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
    2021-02-16T16:42:27.372Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255]
    2021-02-16T16:42:27.372Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on
    2021-02-16T16:42:27.417Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active
    2021-02-16T16:42:27.417Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240
    2021-02-16T16:42:27.436Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[255]
    2021-02-16T16:42:27.436Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on
    2021-02-16T16:42:27.443Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active
    2021-02-16T16:42:27.755Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:217:sslLog()) Performing the SSL/DTLS handshake...ok
    2021-02-16T16:42:27.755Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:217:sslLog()) init SSL Network...ok
    2021-02-16T16:42:27.756Z [hyperiond LEDDEVICE] (INFO) Philips Hue Entertaiment API successful connected! Start Streaming.
    2021-02-16T16:42:27.756Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:1372:noSignalDetection()) No Signal detected - timeout timer started
    2021-02-16T16:42:27.756Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
    2021-02-16T16:42:27.757Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
    2021-02-16T16:42:27.757Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:1277:switchOn())
    2021-02-16T16:42:30.216Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active
    2021-02-16T16:42:30.216Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
    2021-02-16T16:42:30.216Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255]
    2021-02-16T16:42:30.216Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on
    2021-02-16T16:42:30.240Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
    2021-02-16T16:42:30.240Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
    2021-02-16T16:42:30.386Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 0 is now active
    2021-02-16T16:42:30.623Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.1.14
    2021-02-16T16:42:30.623Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.1.14' switch to Hyperion instance 0
    2021-02-16T16:42:33.449Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:315:setCurrentTime()) Timeout clear for priority 0
    2021-02-16T16:42:33.450Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
    2021-02-16T16:42:33.450Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
    2021-02-16T16:42:33.450Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[0]
    2021-02-16T16:42:33.698Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240
    2021-02-16T16:42:33.699Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[0]
    2021-02-16T16:42:34.995Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.1.14' switch to Hyperion instance 1
    2021-02-16T16:42:38.591Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.1.14
     
  16. Lord-Grey

    Lord-Grey Moderator Staff Member Developer

    Messages:
    459
    Hardware:
    RPi3, 32/64bit
    • Like Like x 1
  17. Ravenblight

    Ravenblight New Member

    Messages:
    15
    Hardware:
    RPi3
    So according to issue 1059, I should change code to include switchOnBlack condition in if, recompile and manually reinstall hyperion, then switch to normal api disable switchOnBlack from ui, save, then switch back to entertainment api ?
    If so point me in witch file is this if, I've searched this in git but failed.
     
  18. Lord-Grey

    Lord-Grey Moderator Staff Member Developer

    Messages:
    459
    Hardware:
    RPi3, 32/64bit
    @Ravenblight Sorry, there is no need to compile yourself. The code change should be already part of alpha 9.
    Just update the LED-Device's configuration.
     
  19. Ravenblight

    Ravenblight New Member

    Messages:
    15
    Hardware:
    RPi3
    Hello again @Lord-Grey, yesterday , was first time since I've bought hue set when whole hyperion setup worked as intentended. I've disabled all signal detection options cec, black etc. Wrote home assistant automation, for detecting tv off event, and then disable amplituner otput and turn off hyperion lights. Works almost perfect (some issues with apa 102flicker and gap).
     
    • Like Like x 1