help with usb capture device

  • i have hyperion running on a atopnuc mini pc running ubuntu 20.04.6 LTS. Hyperion sees my WLED and blinks my lights, but hyperion isn't seeing my usb capture device. when I do lsusb I can see the device:

    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

    Bus 001 Device 005: ID 13d3:3503 IMC Networks

    Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller

    Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver

    Bus 001 Device 007: ID 534d:2109 MACROSILICON USB3. 0 capture

    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    new to this, so not sure how to proceed.

    Thanks in advance

  • Go to Best Answer
    • Official Post

    Bus 001 Device 007: ID 534d:2109 MACROSILICON USB3. 0 capture

    is the grabber, so it should also be usable in Hyperion.

    Capturing Hardware > USB Capture activate

    Now the grabber should be visible and you can make settings.

    Under LED Instances > Sources > Enable USB capture

    regards pclin

    Dreambox ONE / TWO

    dreamOS OE2.6

    Amlogic S922X - 53.000 DMIPS - 2 GB RAM - 16 GB Flash - Twin-DVB-S2X Tuner - HDR10 - HLG
    AudioDSP: miniDSP 2x4HD - Amp: Pentagon - Lautsprecher ELAC / ARENDAL
    LG OLED65BX9LB (PicCap, hyperion.NG webOS)

    FireTV 4K max

    hyperion (classic) & Plugin HyperionControl | hyperion-ng 2.0.16-beta.1 (dreamOS)
    Hyperion-ng (Debian bullseye)
    6 x ESP32/Wemos D1 mini - WLED - SK6812 RGBW-NW 60 LEDs/m
    FeinTech VSP01201 - Grabber Macrosilicon

    LG TV Hyperion webOS & PicCap


    Ambilight for ever

    • Best Answer
    • Official Post

    Is v4l installed?

    You can use v4l2-ctl --all to see what your grabber returns, Hyperion works with that too.

    regards pclin

  • padadof2

    Selected a post as the best answer.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!