hallo
Komme nicht mehr mit dem Handy auf Hyperion.NG
Man sieht die Hyperion URL dann bricht es ab und es steht das die URL nicht zu erreichen ist.
Auf dem Pc geht es wunderbar.
Ich hoffe ihr könnt mir da helfen
Danke
hallo
Komme nicht mehr mit dem Handy auf Hyperion.NG
Man sieht die Hyperion URL dann bricht es ab und es steht das die URL nicht zu erreichen ist.
Auf dem Pc geht es wunderbar.
Ich hoffe ihr könnt mir da helfen
Danke
Hi,
überprüfe bitte, ob du mit dem Handy auch wirklich die gleiche Adresse wie mit deinem Rechner aufrufst und sich beide Geräte im gleichen Netzwerk befinden.
Gruß
Marxon
Ja habe beide kontrolliert.
Haben die gleichen IP Adressen.
Ich verstehe das nicht am PC gehts und mit der gleichen Adresse am Handy geht nicht
Mir geht es darum die Philips Hue zu aktivieren.
Jetzt muss ich immer erst den PC hochfahren um die Lampen in Hyperion NG zu aktivieren
Hast du auch den Port mit angegeben?
Also IP-Adresse : Port-Nummer
z.B.
192.168.1.10:8090
Cookies und cache gelöscht am Handy?
Ja habe mit Portnummer eingegeben.
Cokies wurden auch gelöscht.
Komme einfach nicht drauf.
Hyperion dreht sich die ganze Zeit dann kommt eine Fehlermeldung wie wlan zu schwach oder es wird ein Update grade gemacht.
Dann geht der ganze Spaß wieder von vorne los.
Öffne die Hyperion Webseite auf deinem Rechner und gehe im Menü links auf "System" -> "Log".
Lass die Seite geöffnet und versuche es nun nochmal mit dem Handy.
Anschließend klickst du am PC rechts unten auf "Copy Log to Clipbord" und poste den Log hier.
Hier der Log
Hyperion System Summary Report (TV Ambilight), Reported instance: unknown
< ----- System information -------------------- >
Hyperion Server:
- Build: (HEAD detached at df149583) (GitHub-dc6aa4dd/df149583-1637501177)
- Build time: Nov 21 2021 17:01:51
- Git Remote: https://github.com/hyperion-project/hyperion.ng
- Version: 2.0.12
- UI Lang: en (BrowserLang: de)
- UI Access: default
- Avail Capt: dispmanx,v4l2,framebuffer,qt
- Config path: /storage/hyperion
- Database: read/write
Hyperion Server OS:
- Distribution: LibreELEC (official): 9.2.8
- Architecture: arm
- CPU Model: ARMv7 Processor rev 3 (v7l)
- CPU Type: Raspberry Pi 4 Model B Rev 1.1
- CPU Revision: c03111
- CPU Hardware: BCM2835
- Kernel: linux (4.19.127 (WS: 32))
- Root/Admin: true
- Qt Version: 5.7.1
- Python Version: 3.5.3
- Browser: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:94.0) Gecko/20100101 Firefox/94.0
< ----- Configured Instances ------------------ >
0: TV Ambilight Running: true
1: Philips Hue Running: true
< ----- This instance's priorities ------------ >
240: VISIBLE! (V4L) Owner: V4L2
priorities_autoselect: true
< ----- This instance components' status ------->
ALL - true
SMOOTHING - true
BLACKBORDER - true
FORWARDER - false
BOBLIGHTSERVER - false
GRABBER - false
V4L - true
LEDDEVICE - true
< ----- This instance's configuration --------- >
{"backgroundEffect":{"color":[255,138,0],"effect":"Warm mood blobs","enable":false,"type":"effect"},"blackborderdetector":{"blurRemoveCnt":1,"borderFrameCnt":50,"enable":true,"maxInconsistentCnt":10,"mode":"default","threshold":5,"unknownFrameCnt":600},"boblightServer":{"enable":false,"port":19333,"priority":128},"color":{"channelAdjustment":[{"backlightColored":false,"backlightThreshold":0,"blue":[0,0,255],"brightness":100,"brightnessCompensation":0,"cyan":[0,255,255],"gammaBlue":1,"gammaGreen":1,"gammaRed":1,"green":[0,255,0],"id":"default","leds":"*","magenta":[255,0,255],"red":[255,0,0],"white":[255,255,255],"yellow":[255,255,0]}],"imageToLedMappingType":"multicolor_mean"},"device":{"blackLightsTimeout":15000,"brightnessFactor":1,"brightnessMax":1,"brightnessMin":0,"brightnessThreshold":0,"clientkey":"2AD1FC0E9054C489D47729959BA7983F","colorOrder":"rgb","debugLevel":"0","debugStreamer":false,"groupId":2,"hardwareLedCount":2,"host":"192.168.178.47","lightIds":["1","2"],"port":80,"restoreOriginalState":true,"sslHSTimeoutMax":1000,"sslHSTimeoutMin":400,"sslReadTimeout":0,"switchOffOnBlack":false,"transitiontime":1,"type":"philipshue","useEntertainmentAPI":true,"username":"Vg-xj3XQIhYdEX6JsXHVmnQ9N0InVbXY2eIL2MrP","verbose":false},"effects":{"disable":[""],"paths":["$ROOT/custom-effects"]},"flatbufServer":{"enable":true,"port":19400,"timeout":5},"foregroundEffect":{"color":[0,0,255],"duration_ms":3000,"effect":"Rainbow swirl fast","enable":true,"type":"effect"},"forwarder":{"enable":false},"framegrabber":{"cropBottom":0,"cropLeft":0,"cropRight":0,"cropTop":0,"device":"auto","enable":false,"fps":10,"height":45,"input":0,"pixelDecimation":8,"width":80},"general":{"configVersion":"2.0.12","name":"TV Ambilight","previousVersion":"2.0.12","showOptHelp":true,"watchedVersionBranch":"Stable"},"grabberV4L2":{"available_devices":"USB3. 0 capture: USB3. 0 captur","blueSignalThreshold":0,"cecDetection":false,"cropBottom":0,"cropLeft":0,"cropRight":0,"cropTop":0,"device":"/dev/video0","device_inputs":"0","enable":true,"encoding":"YUYV","flip":"NO_CHANGE","fps":30,"fpsSoftwareDecimation":0,"framerates":"30","greenSignalThreshold":100,"hardware_brightness":-11,"hardware_contrast":148,"hardware_hue":0,"hardware_saturation":180,"height":480,"input":0,"noSignalCounterThreshold":200,"redSignalThreshold":0,"resolutions":"0","sDHOffsetMax":0.46,"sDHOffsetMin":0.4,"sDVOffsetMax":0.9,"sDVOffsetMin":0.1,"signalDetection":false,"sizeDecimation":8,"standard":"NONE","width":640},"instCapture":{"systemEnable":false,"systemGrabberDevice":"NONE","systemPriority":250,"v4lEnable":true,"v4lGrabberDevice":"USB3. 0 capture: USB3. 0 captur","v4lPriority":240},"jsonServer":{"port":19444},"ledConfig":{"classic":{"bottom":0,"edgegap":0,"glength":0,"gpos":0,"hdepth":8,"left":0,"overlap":0,"pblh":0,"pblv":100,"pbrh":100,"pbrv":100,"position":0,"ptlh":0,"ptlv":0,"ptrh":100,"ptrv":0,"reverse":false,"right":0,"top":1,"vdepth":5},"ledBlacklist":[],"matrix":{"cabling":"snake","ledshoriz":1,"ledsvert":1,"start":"top-left"}},"leds":[{"hmax":1,"hmin":0.85,"name":"Hue color lamp rechts","vmax":0.75,"vmin":0.25},{"hmax":0.15,"hmin":0,"name":"Hue color lamp links","vmax":0.75,"vmin":0.25}],"logger":{"level":"debug"},"network":{"apiAuth":true,"internetAccessAPI":false,"ipWhitelist":[],"localAdminAuth":true,"localApiAuth":false,"restirctedInternetAccessAPI":false},"protoServer":{"enable":true,"port":19445,"timeout":5},"smoothing":{"decay":1,"dithering":false,"enable":true,"interpolationRate":25,"outputRate":25,"time_ms":200,"type":"linear","updateDelay":0,"updateFrequency":25},"webConfig":{"crtPath":"","document_root":"","keyPassPhrase":"","keyPath":"","port":8090,"sslPort":8092}}
< ----- Current Log --------------------------- >
2019-04-11T16:28:39.659Z [ LEDDEVICE] (ERROR) Device disabled, device 'philipshue' signals error: 'No light-IDs found at the Philips Hue Bridge'
2021-11-28T14:23:05.518Z [ SETTINGSMGR] (WARNING) Fixing json data!
2021-11-28T14:23:05.558Z [ SETTINGSMGR] (WARNING) Config Fix: [root].device.rewriteTime: Removed property: rewriteTime
2021-11-28T14:27:38.675Z [ SETTINGSMGR] (WARNING) Fixing json data!
2021-11-28T14:27:38.716Z [ SETTINGSMGR] (WARNING) Config Fix: [root].device.rewriteTime: Removed property: rewriteTime
2021-11-28T14:39:11.228Z [ SETTINGSMGR] (WARNING) Fixing json data!
2021-11-28T14:39:11.261Z [ SETTINGSMGR] (WARNING) Config Fix: [root].device.rewriteTime: Removed property: rewriteTime
2021-11-28T14:39:11.261Z [ SETTINGSMGR] (WARNING) Config Fix: [root].ledConfig.ledBlacklist: Remove empty array
2021-11-28T14:41:02.887Z [ SETTINGSMGR] (WARNING) Fixing json data!
2021-11-28T14:41:02.917Z [ SETTINGSMGR] (WARNING) Config Fix: [root].device.rewriteTime: Removed property: rewriteTime
2021-11-28T20:39:37.203Z [ WEBSOCKET] (DEBUG) (WebSocketClient.cpp:215:sendClose()) Send close to ::ffff:192.168.178.20: 1000
2021-11-28T20:39:37.826Z [ WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.178.20
2021-11-28T20:39:38.023Z [ WEBSOCKET] (DEBUG) (JsonAPI.cpp:122:handleInstanceSwitch()) Client '::ffff:192.168.178.20' switch to Hyperion instance 1
2021-11-28T20:39:38.537Z [ WEBSOCKET] (DEBUG) (JsonAPI.cpp:1090:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.20
2021-11-28T20:39:39.951Z [ HYPERION] (DEBUG) (PriorityMuxer.cpp:271:setInputImage()) Priority 240 is now inactive
2021-11-28T20:39:39.952Z [ HYPERION] (DEBUG) (PriorityMuxer.cpp:374:setCurrentTime()) Set visible priority to 255
2021-11-28T20:39:39.952Z [ HYPERION] (DEBUG) (Hyperion.cpp:571:handleSourceAvailability()) priority[255], previousPriority[240]
2021-11-28T20:39:39.952Z [ HYPERION] (DEBUG) (Hyperion.cpp:574:handleSourceAvailability()) No source left -> Pause output processing and switch LED-Device off
2021-11-28T20:39:39.952Z [ HYPERION] (DEBUG) (PriorityMuxer.cpp:271:setInputImage()) Priority 240 is now inactive
2021-11-28T20:39:39.952Z [ HYPERION] (DEBUG) (PriorityMuxer.cpp:374:setCurrentTime()) Set visible priority to 255
2021-11-28T20:39:39.952Z [ HYPERION] (DEBUG) (Hyperion.cpp:571:handleSourceAvailability()) priority[255], previousPriority[240]
2021-11-28T20:39:39.953Z [ HYPERION] (DEBUG) (Hyperion.cpp:574:handleSourceAvailability()) No source left -> Pause output processing and switch LED-Device off
2021-11-28T20:39:39.953Z [ LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:1313:switchOff())
2021-11-28T20:39:41.083Z [ HYPERION] (DEBUG) (PriorityMuxer.cpp:271:setInputImage()) Priority 240 is now active
2021-11-28T20:39:41.083Z [ HYPERION] (DEBUG) (PriorityMuxer.cpp:271:setInputImage()) Priority 240 is now active
2021-11-28T20:39:41.083Z [ HYPERION] (DEBUG) (PriorityMuxer.cpp:374:setCurrentTime()) Set visible priority to 240
2021-11-28T20:39:41.083Z [ HYPERION] (DEBUG) (PriorityMuxer.cpp:374:setCurrentTime()) Set visible priority to 240
2021-11-28T20:39:41.084Z [ HYPERION] (DEBUG) (Hyperion.cpp:571:handleSourceAvailability()) priority[240], previousPriority[255]
2021-11-28T20:39:41.084Z [ HYPERION] (DEBUG) (Hyperion.cpp:571:handleSourceAvailability()) priority[240], previousPriority[255]
2021-11-28T20:39:41.084Z [ HYPERION] (DEBUG) (Hyperion.cpp:582:handleSourceAvailability()) new source available -> Resume output processing and switch LED-Device on
2021-11-28T20:39:41.084Z [ HYPERION] (DEBUG) (Hyperion.cpp:582:handleSourceAvailability()) new source available -> Resume output processing and switch LED-Device on
2021-11-28T20:39:41.085Z [ LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:1279:switchOn())
2021-11-28T20:39:41.140Z [ LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:1097:startStream()) Start entertainment stream
2021-11-28T20:39:41.693Z [ LEDDEVICE] (INFO) Philips Hue Entertainment API successful connected! Start Streaming.
ich hoffe das mir einer helfen kann
Sorry, ich hatte etwas vergessen: stelle oben auf der Log-Seite, das Log Level auf "Debug" und dann versuche es nochmal mit dem Handy
Guten Morgen an alle.
Habe Log-Level auf Debug gestellt und auf Save Settings gedrückt.
Dann nochmal mit Handy die IP mit Portnummer aufgerufen.
Immer noch das gleiche.
Schade
Also bei das gleiche in Grün.
Habe sowohl als Update von Hyperion.ng 11 auf 2.12 Update gemacht als auch als Neuinstallation.
Es wird kein Service mitinstalliert. Wenn ich den Service nach alter Art manuell erstelle wird er erstellt und gestartet.
Leider komme ich trotzdem nicht aufs Interface.
In der Konsole hyperiond starten ausgaben posten.
Ein Service wird normalerweise mit installiert!
gruß pclin
pi@raspberrypi:~ $ hyperiond
Hyperion caught signal :SIGSEGV
2021-11-29T13:50:00.483 CORE : <ERROR> /lib/arm-linux-gnueabihf/libc.so.6(__default_rt_sa_restorer+0) [0xb5474120]
Speicherzugriffsfehler
pi@raspberrypi:~ $
pi@raspberrypi:~ $ systemctl status hyperion@pi.service
● hyperion@pi.service - Hyperion ambient light syste Loaded: loaded (/etc/systemd/system/hyperion@pi.s Active: active (running) since Mon 2021-11-29 14: Docs: https://docs.hyperion-project.org
Main PID: 3098 (hyperiond)
Tasks: 1 (limit: 3720)
CGroup: /system.slice/system-hyperion.slice/hyper └─3098 /usr/bin/hyperiond
Nov 29 14:01:46 raspberrypi systemd[1]: Started Hypelines 1-10/10 (END)
Cosmicbase Starte doch bitte mal mit Debug-Output, damit man sieht an welcher Stelle der Abbruch grob passiert.
d.h. hyperiond -d
Und bist Du Dir sicher, dass nicht irgendeine "alte" Hyperion Version mit dem letzten vermischt ist...?
Falls Du zwischendrin auf den apt Server gewechselt bist, musstest Du vorher die manuelle deb Installation deinstallieren.
sudo apt-get remove 'Paketname'
oder
sudo apt-get remove --purge 'Paketname'
--purge
entfernt alles, was den Paketnamen betrifft, aber nicht die Abhängigkeiten, die bei der Installation damit installiert werden. Beide Befehle sind gleichwertig.
gruß pclin
So das Hyperion 2.12 funktioniert.
Nach einem Reboot vom Raspbi ist aber das Interface von Hyperion nicht erreichbar.
Erst wenn ich hyperiond -d eingebe komme aufs Webinterface.
Wenn ich aus der Konsole gehe komme ich nicht mehr aufs Interface.
pi@raspberrypi:~ $ hyperiond -d
2021-11-30T19:29:40.719 MAIN : <INFO> Starting Hyperion - 2.0.12+nightly20211130e3b4944, master (GitHub-6356190/e3b4944-1638208263), built: Nov 30 2021:01:06:52
2021-11-30T19:29:40.720 MAIN : <DEBUG> main.cpp:397:main() | QtVersion [5.11.3]
2021-11-30T19:29:40.720 MAIN : <INFO> Set user data path to '/home/pi/.hyperion'
2021-11-30T19:29:40.788 DAEMON : <DEBUG> PythonInit.cpp:75:PythonInit() | Initializing Python interpreter
2021-11-30T19:29:41.002 SETTINGSMGR : <DEBUG> SettingsManager.cpp:186:SettingsManager() | Settings database initialized
2021-11-30T19:29:41.003 DAEMON : <INFO> CEC handler created
2021-11-30T19:29:41.016 EFFECTFILES : <INFO> 40 effects loaded from directory :/effects/
2021-11-30T19:29:41.020 EFFECTFILES : <INFO> 22 effect schemas loaded from directory :/effects/schema/
2021-11-30T19:29:41.021 EFFECTFILES : <INFO> 4 effects loaded from directory /home/pi/.hyperion/custom-effects/
2021-11-30T19:29:41.056 SETTINGSMGR : <DEBUG> SettingsManager.cpp:186:SettingsManager() | Settings database initialized
2021-11-30T19:29:41.059 BLACKBORDER : <DEBUG> BlackBorderProcessor.cpp:64:handleSettingsUpdate() | Set mode to: default
2021-11-30T19:29:41.059 COMPONENTREG : <DEBUG> ComponentRegister.cpp:41:setNewComponentState() | Blackborder detector: enabled
2021-11-30T19:29:41.078 DAEMON : <INFO> set screen capture device to 'dispmanx'
2021-11-30T19:29:41.079 DAEMON : <INFO> DISPMANX frame grabber created
2021-11-30T19:29:41.080 CEC : <INFO> Starting CEC handler
2021-11-30T19:29:41.080 V4L2 : <DEBUG> Grabber.cpp:141:setWidthHeight() | Set new width: 640, height: 480 for capture
2021-11-30T19:29:41.080 V4L2 : <INFO> Set new frames per second to: 60 fps
2021-11-30T19:29:41.080 V4L2 : <INFO> Set flipmode to NO_CHANGE
2021-11-30T19:29:41.083 LEDDEVICE : <INFO> Start LedDevice 'sk6812spi'.
2021-11-30T19:29:41.084 LEDDEVICE : <DEBUG> LedDevice.cpp:148:init() | deviceConfig: [{"colorOrder":"grb","currentLedCount":300,"hardwareLedCount":300,"invert":false,"latchTime":0,"output":"/dev/spidev0.0","rate":3000000,"rewriteTime":1000,"type":"sk6812spi","whiteAlgorithm":"subtract_minimum"}]
2021-11-30T19:29:41.084 COMPONENTREG : <DEBUG> ComponentRegister.cpp:41:setNewComponentState() | Smoothing: enabled
2021-11-30T19:29:41.084 LEDDEVICE : <DEBUG> LedDevice.cpp:414:setLatchTime() | LatchTime updated to 0ms
2021-11-30T19:29:41.084 LEDDEVICE : <DEBUG> LedDevice.cpp:439:setRewriteTime() | Refresh interval = 1000ms
2021-11-30T19:29:41.084 SMOOTHING : <DEBUG> LinearColorSmoothing.cpp:687:selectConfig() | cfg [0]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-11-30T19:29:41.084 LEDDEVICE : <DEBUG> LedDevice.cpp:445:setRewriteTime() | RewriteTime updated to 1000ms
2021-11-30T19:29:41.084 LEDDEVICE : <DEBUG> ProviderSpi.cpp:59:init() | _baudRate_Hz [3000000], _latchTime_ms [0]
2021-11-30T19:29:41.084 LEDDEVICE : <DEBUG> ProviderSpi.cpp:60:init() | _spiDataInvert [0], _spiMode [0]
2021-11-30T19:29:41.084 LEDDEVICE : <DEBUG> LedDeviceSk6812SPI.cpp:41:init() | whiteAlgorithm : subtract_minimum
2021-11-30T19:29:41.085 SMOOTHING : <DEBUG> LinearColorSmoothing.cpp:687:selectConfig() | Previous line repeats 1 times
2021-11-30T19:29:41.085 EFFECTENGINE : <INFO> Run effect "Rainbow swirl fast" on channel 1
2021-11-30T19:29:41.126 EFFECTENGINE : <DEBUG> EffectEngine.cpp:181:runEffectScript() | Start the effect: name [Rainbow swirl fast], smoothCfg [2]
2021-11-30T19:29:41.126 HYPERION : <DEBUG> PriorityMuxer.cpp:165:registerInput() | Register new input 'System/EFFECT' with priority 1 as inactive
2021-11-30T19:29:41.126 HYPERION : <INFO> Initial foreground effect 'Rainbow swirl fast' started
2021-11-30T19:29:41.127 HYPERION : <DEBUG> PriorityMuxer.cpp:165:registerInput() | Register new input 'System/V4L' with priority 235 as inactive
2021-11-30T19:29:41.127 COMPONENTREG : <DEBUG> ComponentRegister.cpp:41:setNewComponentState() | V4L capture device: enabled
2021-11-30T19:29:41.133 BOBLIGHT : <DEBUG> BoblightServer.cpp:28:BoblightServer() | Instance created
2021-11-30T19:29:41.134 COMPONENTREG : <DEBUG> ComponentRegister.cpp:41:setNewComponentState() | LED device: enabled
2021-11-30T19:29:41.138 CEC : <INFO> Auto detecting CEC adapter
2021-11-30T19:29:41.138 CEC : <INFO> CEC Adapter:
2021-11-30T19:29:41.139 CEC : <INFO> Name : RPI
2021-11-30T19:29:41.139 CEC : <INFO> Path : Raspberry Pi
2021-11-30T19:29:41.223 HYPERION : <DEBUG> PriorityMuxer.cpp:271:setInputImage() | Priority 1 is now active
2021-11-30T19:29:41.223 HYPERION : <DEBUG> PriorityMuxer.cpp:374:setCurrentTime() | Set visible priority to 1
2021-11-30T19:29:41.224 SMOOTHING : <DEBUG> LinearColorSmoothing.cpp:687:selectConfig() | cfg [2]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-11-30T19:29:41.224 HYPERION : <DEBUG> Hyperion.cpp:571:handleSourceAvailability() | priority[1], previousPriority[255]
2021-11-30T19:29:41.224 HYPERION : <DEBUG> Hyperion.cpp:582:handleSourceAvailability() | new source available -> Resume output processing and switch LED-Device on
2021-11-30T19:29:41.320 V4L2 : <DEBUG> V4L2Grabber.cpp:151:init() | Set device (path) to: FHD Capture: FHD Capture (/dev/video0)
2021-11-30T19:29:41.320 V4L2 : <DEBUG> V4L2Grabber.cpp:488:init_device() | Set device input to: Camera 1
2021-11-30T19:29:41.332 V4L2 : <DEBUG> V4L2Grabber.cpp:614:init_device() | Set resolution to width=640 height=480
2021-11-30T19:29:41.343 V4L2 : <DEBUG> V4L2Grabber.cpp:631:init_device() | Set framerate to 60 fps
2021-11-30T19:29:41.343 V4L2 : <DEBUG> V4L2Grabber.cpp:739:init_device() | Pixel format=MJPEG
2021-11-30T19:29:41.350 V4L2 : <INFO> Started
2021-11-30T19:29:41.350 DAEMON : <DEBUG> hyperiond.cpp:608:handleSettingsUpdate() | V4L2 grabber created
2021-11-30T19:29:41.351 JSONSERVER : <DEBUG> JsonServer.cpp:28:JsonServer() | Created instance
2021-11-30T19:29:41.359 JSONSERVER : <INFO> Started on port 19444
2021-11-30T19:29:41.371 FLATBUFSERVER : <INFO> Started on port 19400
2021-11-30T19:29:41.372 PROTOSERVER : <INFO> Started on port 19445
2021-11-30T19:29:41.372 WEBSERVER : <DEBUG> WebServer.cpp:33:initServer() | Initialize Webserver
2021-11-30T19:29:41.375 HYPERION : <INFO> Hyperion instance 'First LED Hardware instance' has been started
2021-11-30T19:29:41.376 WEBSERVER : <DEBUG> WebServer.cpp:33:initServer() | Initialize Webserver
2021-11-30T19:29:41.390 WEBSERVER : <DEBUG> WebServer.cpp:92:handleSettingsUpdate() | Apply Webserver settings
2021-11-30T19:29:41.390 WEBSERVER : <DEBUG> WebServer.cpp:92:handleSettingsUpdate() | Apply Webserver settings
2021-11-30T19:29:41.390 WEBSERVER : <DEBUG> WebServer.cpp:110:handleSettingsUpdate() | Set document root to: :/webconfig
2021-11-30T19:29:41.390 WEBSERVER : <DEBUG> WebServer.cpp:110:handleSettingsUpdate() | Set document root to: :/webconfig
2021-11-30T19:29:41.391 WEBSERVER : <INFO> 'Hyperion Webserver' started on port 8090
2021-11-30T19:29:41.408 WEBSERVER : <DEBUG> WebServer.cpp:176:handleSettingsUpdate() | Setup SSL certificate
2021-11-30T19:29:41.408 WEBSERVER : <DEBUG> WebServer.cpp:192:handleSettingsUpdate() | Setup private SSL key
2021-11-30T19:29:41.408 WEBSERVER : <INFO> 'Hyperion Webserver' started on port 8092
2021-11-30T19:29:41.631 HYPERION : <DEBUG> PriorityMuxer.cpp:271:setInputImage() | Priority 235 is now active
2021-11-30T19:29:42.737 CEC : <INFO> CEC Handler initialized with adapter : RPI
2021-11-30T19:29:44.206 EFFECTENGINE : <INFO> effect finished
2021-11-30T19:29:44.409 HYPERION : <DEBUG> PriorityMuxer.cpp:337:setCurrentTime() | Timeout clear for priority 1
2021-11-30T19:29:44.409 HYPERION : <DEBUG> PriorityMuxer.cpp:374:setCurrentTime() | Set visible priority to 235
2021-11-30T19:29:44.410 SMOOTHING : <DEBUG> LinearColorSmoothing.cpp:687:selectConfig() | cfg [0]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-11-30T19:29:44.410 HYPERION : <DEBUG> Hyperion.cpp:571:handleSourceAvailability() | priority[235], previousPriority[1]
Klar wenn du die Konsole beendest wird dann auch der Prozess gestoppt.
Was meldet denn systemctl status hyperion@pi ?
gruß pclin
systemctl status hyperion@pi
● hyperion@pi.service - Hyperion ambient light syst Loaded: loaded (/etc/systemd/system/hyperion@pi. Active: activating (auto-restart) (Result: signa Docs: https://docs.hyperion-project.org
Process: 24496 ExecStart=/usr/bin/hyperiond (code Main PID: 24496 (code=killed, signal=SEGV)
Erst wenn ich hyperiond -d eingebe komme aufs Webinterface.
Wenn ich aus der Konsole gehe komme ich nicht mehr aufs Interface.
Hier ein wenig Unix für die Windows Benutzer
Wenn man den Prozess im Terminal startet, hängt er am Terminal.
d.h. wenn das Terminal beendet wird, werden auch die daran hängenden Prozesse beendet.
Um das zu vermeiden, startet man den Prozess mit Ampersand, damit der im Hintergrund lebt und nicht am Terminal hängt.
Also:
hyperiond -d &
Jetzt kann das Terminal geschlossen werden und der Prozess läuft weiter....
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!